fiber- carbon djelovi

gregor.tm · Posted: Tue Sep 09, 2008 12:47 pm Post subject: fiber- carbon djelovi

dali netko zna ili je èuo za tu firmu:

http://www.the-arc-angels.co.uk/default.asp?PageNo=4

imaju razprodaju plastike za minija i kako moj mini ide na dietu, treba hrpu novih delova.... ali prvi put èujem za tu firmu, pa neznam kakav im je kvalitet. a imaju hrpu koristnih stvari, pa bi se mi vjerovatno isplatilo sve uzeti na jednom mjestu.

svaka info dobrodola!
_________________
www.miniforum.si

rusimir · Posted: Tue Oct 07, 2008 10:39 am Post subject:

Ekipa ako bi netko uzimao dijelove od carbon-a ili fiberglass-a neka se javi gregor.tm, Lilihip ili rusimiru!
Dijelove mozete pogledati na gore navedenom linku!!
Hvala
_________________

TURBO ST · Mini Owner Joined: 13 Aug 2007 Posts: 65

CIJENE

rusimir · Posted: Tue Oct 07, 2008 8:46 pm Post subject:

Pitas nekog od gore navedenih sta te zanima i dobijes kroz par dana cijene! Smile

_________________

TURBO ST · Mini Owner Joined: 13 Aug 2007 Posts: 65

pa sta se oni srame odi pisat ili...

rusimir · Posted: Thu Oct 09, 2008 6:52 pm Post subject:

Malo su stidljivi!

Pa imas pun kufer dijelova od carbona i od fiberglassa i sad bi netko trebao ispisati cijeli cijenik, jednostavnije je tebi, ako te zanima pitat cijenu za dio koji trebas i taj netko koji se stidi ti kaze cijenu!!! JEDNOSTAVNIJE to je cilj!

Uzivaj!
_________________

Lilihip · Posted: Thu Oct 09, 2008 10:34 pm Post subject:

do sada se jo nije naruèivalo od njih ali ideja je utediti na potarini. roba æe stiæi u sloveniju (MB) i svatko sebi fura u HR dijelove.

aj napii kaj te zanima pa æemo poslati group upit.

TURBO ST · Mini Owner Joined: 13 Aug 2007 Posts: 65

prednja i zadnja hauba da su od carbon-a i u bezbojnom laku
a pitaj i za oba vrata (obicni fiber) koliko da vidin jel mi ih se isplati radit ili narucit...

gregor.tm · Posted: Fri Oct 10, 2008 12:10 pm Post subject:

evo ovako ako se kome da èitati odgovor na moj upit koji sam poslao englezu:

Dear Gregor,

We would be happy to supply you with the carbon fibre and fibreglass panels you requested, and I have attached a quote for these items. There are various different options in the quote, which will enable you to order the most suitable panels for your customers.

There are three options to choose from regarding the structure of the carbon fibre panels, ranging from a less expensive option which is popular for customers who want the carbon look, through to a more expensive option where performance is the priority. With each option there is a further choice of whether to have the carbon weave exposed or not:

OPTION 1: The basic package we can provide you with uses carbon fibre with CSM (chopped strand mat, fibreglass). This is popular as it is the least expensive carbon option, and has the option of the carbon weave showing, but as it uses fewer layers of carbon in the design compared with our other options, it offers the least strength. It is also the heaviest construction.

OPTION 2: The next option is to use carbon fibre/woven glass which is significantly tougher and lighter than the previous option but obviously the cost is increased. This is very popular for race use.

OPTION 3: The final option is the same as the second option but uses an epoxy based poly vinyl ester resin in place of the polyester resin. Poly ester vinyl resin is much tougher than polyester resin, and due to this fact less resin and layers of laminate are required, making the finished product very light as well as rigid. This design is only really used on out and out competition cars such as mini miglias due to the extra cost.

Our ultralite fibreglass items have the same looking finish as the heavy duty construction. We recommend our heavy duty panels rather than the ultralite panels for everyday road use, due to the stronger construction, although many of our customers do fit our ultralite panels to their every day minis with no problem. We would also recommend our heavy duty panels for concourse shows. Our panels are made from moulds taken from heritage panels, so the fit it very good. However, as with all composite panels, some slight trimming may be required to get a perfect fit, as all minis are slightly different. It is difficult to give you an accurate weight for each panel as there are so many options, but once we know which construction option you are interested in, we could give you a better idea of weight.

We could have the panels ready for you between 2-8 weeks, depending on the items and quantity that you order. The prices in the quote exclude packaging. Normally this is included in a delivery charge, but if you require packaging without delivery, please let me know and I could provide a quote for this, again depending on the quantity of your order.

As you can see, there are a lot of options when it comes to composite panels, so if you would like to discuss any of this further please dont hesitate to call or email us, and we will do our best to help.

Kind regards,

Annabel White.

P.s. If there are any other panels that you are interested in, please get in touch, as we our constantly expanding our product range. You may be interested in our Sportspack or Group 2 wheel arches, or our Van doors, which are proving to be quite popular.
_________________
www.miniforum.si

gregor.tm · Posted: Fri Oct 10, 2008 12:22 pm Post subject:

evo i nekoliko cijena za koje sam pitao.
pazi: za skoro svaku komad ima 6 varijanti materiala.... èitaj post gore.

nadam se da èete se snaèi sa cijenama. u prvom opisu su te napisane sa desne strane, ..... nadalje su napisane ispod teksta.

sve cijene su u funtima. ja im plaèam cca. 1,3..... to znaèi 100 funti je oko 130 eur. to èemo vidjeti toèno na dan uplate.

i cijene:

Carbon Mk3 Boot lid (DOUBLE skin)

NOTE: The inner skin has a black gel coat finish on the
exposed weave option for this panel. The exposed
weave is only on the outer/exterior skin.

1. White gel coat 110.00
1. Exposed Weave-140.00
2. White gel coat- 140.00
2. Exposed weave- 170.00
3. White gel coat -170.00
3. Exposed weave- 200.00

Carbon Mk3 Boot lid (SINGLE skin)
1. White gel coat
1. Exposed Weave
2. White gel coat
2. Exposed weave
3. White gel coat
3. Exposed weave

60.00
95.00
85.00
130.00
100.00
145.00

Carbon Mk3 Ultralite bonnet
1. White gel coat
1. Exposed Weave
2. White gel coat
2. Exposed weave
3. White gel coat
3. Exposed weave

80.00
190.00
110.00
220.00
140.00
250.00

Carbon Two piece Ultralite front end
(with Mk1 or Mk3 bonnet)

NOTE: Exposed weave option refers only to the bonnet.
The front end itself will be in white gel coat for both
options.

1. White gel coat
1. Exposed Weave
2. White gel coat
2. Exposed weave
3. White gel coat
3. Exposed weave

220.00
330.00
260.00
380.00
310.00
430.00

Carbon Bumpers (pair)
1. Black gel coat
1. Exposed Weave
2. Black gel coat
2. Exposed weave
3. White gel coat
3. Exposed weave

75.00
95.00
95.00
120.00
120.00
150.00

Fibreglass One piece heavy duty flip front
White gel coat
150.00

Fibreglass Smooth boot lid (single skin)
White gel coat
38.00

za ostale djelove gledaj direktno njihov page:
www.the-arc-angels.co.uk

kada se nas skupi dovoljno, idem u naruèivanje. javite ako vas ta zanima.
a do tada uivajte!
_________________
www.miniforum.si

gregor.tm · Posted: Fri Oct 10, 2008 1:56 pm Post subject:

ma cene nisu tajne. zbog toga sam i priljepio njihov link, da svi vide cene, proizvode,...... itd. i naravno da se je to manje greaka sa moje strane kod naruèivanja, jer se veè gubim u mailovima vezano uz minija svakog dana. vie ni neznam kome sam ta obeèao, odgovorio, naruèio,....

ono to odaberete, javite meni i grupno naruèujem...... a cilje nije zarada (nemam tu nikakav svoj postotak), nego utjeda na prijevozu kao to je Filip rekao. kada vidim toèno koliko nas ima, ravnopravno podjelim trokove prijevoza..... a ti èe ionako biti nekoliko puta povoljniji od klasiène pote Smile

prvi put naruèujem od te firme i to je sve to vam mogu reèi. navodno su odlièni.... i jedini koji su tako detaljno opisali svoje artikle. èak puno bolje od npr. curley plastike, koji su kao vodeèi........
_________________
www.miniforum.si

Knot · Posted: Fri Oct 10, 2008 2:11 pm Post subject:

ifra:
Budi ðiber - kupi fiber, dobi lepak iber !
_________________
Pa, kak ti fali ulja...?!

Fakin · Posted: Fri Oct 10, 2008 6:54 pm Post subject:

fiber i plexiglas sucks on Mini Crazy

_________________

gregor.tm · Posted: Mon Oct 13, 2008 9:43 am Post subject:

jo jedna napomena....
to naruèivanje kod njih nije konstantno kao kod minisparesa. naruèujem samo ovoga puta jer trebam djelove za sebe. sledeèe naruèivanje èe biti samo ako se skupi npr. barem 5 ljudi, kako trokovi prijevoza iz GB do mene nebi doli vie od 50 eur na osobu.
to znaèi: navali narode dok ima prilike BLUM

upravo danas sam im pisao ako mi mogu dati cijene za sve njihove dijelove, kako bi ih mogao objaviti a vi sami odaberete kaj hoèete.

carbon rules!
_________________
www.miniforum.si

gregor.tm · Posted: Tue Oct 21, 2008 8:12 am Post subject:

bok svima.
dobio sam cjenik svih fiber i carbon djelova koje proizvode. zapravo cijene su iste kao na internetu. gledajte:
http://www.the-arc-angels.co.uk/shop.asp

na alost ako ga priljepim na forum, gube se tabele.
tko eli, neka javi, pa mu ga poaljem. kako primam ogromno mailova, molim vas, da u naslov napiete npr. fiber, carbon..... da se ne gubim.

ja bih uskoro naruèio.... to znaèi barem drugi tjedan ako ste za?
interesenti javite se.
_________________
www.miniforum.si